Home / Dust shoes / Standard Dust Shoe
56–90 mm · 4″ spiral hose
Standard Dust Shoe
One-piece shoe with a built-in collar made to your spindle and a threaded port your spiral hose screws straight onto.
- Quick lever cam clamp: set the brush height for each bit, or install and remove it in seconds, no tools
- Collet-and-clamp design grips your spindle securely through heavy cuts
- Built-in collar made to your exact spindle diameter
- Angled 4″ threaded port: spiral hose screws straight on
- Magnetic skirt held by six 10 mm magnets, pulls off for bit changes
- 2″ high-quality American-made brush
- Optional 25 mm skirt extension for long bits or a thicker spoilboard
- Every part sold separately, so repairs are quick and cheap
Accent color
- Red
- Green
- Pink
- Orange
- Yellow
- Sky Blue
- Mint Green
Pick the color of the skirt and cam lever when you order. Photos show red.
Buy on
Tell us your spindle diameter when you order. How to measure
Inside the Standard Dust Shoe
Snaps together, no tools
Every part is printed in durable, impact-resistant matte PETG, and everything stacks, snaps or clamps together, so setup and teardown take seconds.
- Clamp collar with cam leverFlip the lever to lock onto your spindle. Flip it back to slide the shoe up or down so the brush sits right for the bit you're using, or to take it off.
- Integrated baseOne-piece body with a built-in collar sized to your spindle and an angled 4″ threaded port for spiral dust hose.
- Optional 25 mm extensionAdds reach for longer bits or a thicker spoilboard. Leave it off when you don't need it.
- Magnetic skirtHeld securely by six strong 10 mm magnets, and pulls straight off in a second for bit changes.
- 2″ American-made brushA high-quality brush made in the USA. Dense bristles seal against the work so chips go up the hose, not across the shop.
Specs
Standard Dust Shoe at a glance
| Spindle | 56–90 mm, built-in collar made to your exact diameter |
|---|---|
| Hose | 4″ spiral hose, threaded port |
| Clamp | Cam lever, tool-free height adjustment |
| Skirt | Magnetic, six 10 mm magnets |
| Brush | 2″, American-made |
| Extension | Optional 25 mm skirt extension for long bits |
| Replacement parts | Available for every part |
| Material | Durable, impact-resistant matte PETG |
| Accent color | Red, Green, Pink, Orange, Yellow, Sky Blue or Mint Green |
| Overall size | 275 × 143 × 178 mm (10.83 × 5.63 × 7.00 in), L × W × H with brush |
| Spindle to port | 150 mm center to center |
| Hose mouth | 99 mm outside diameter at the top rim (nominal 4″) |
| Brush length | 51 mm (2.00 in) |
| Skirt height | 25 mm |
| Chute height | 92 mm above the base |
Built into every shoe
Every shoe. Every feature.
- One flip. Locked in.The cam lever clamp mounts the shoe and sets your brush height in seconds. No wrenches, no fiddling.
- A grip that won’t let goOur collet-and-clamp design wraps your spindle evenly and holds tight through the heaviest cuts.
- Built to breatheEvery chute and port is shaped for maximum airflow, so chips and dust go up the hose instead of across your shop.
- Bit changes in a blinkThe magnetic brush skirt pops off with one pull and snaps right back where it belongs.
- American-made bristlesA dense, high-quality 2″ brush made in the USA seals tight to the work and keeps its shape job after job.
- Room for the long onesRunning long bits? Add the skirt extension and the brush still meets the work.
- Your shop, your colorMake it yours in Red, Green, Pink, Orange, Yellow, Sky Blue or Mint Green.
- Built to keep runningEvery part is sold separately, so a worn brush or a cracked skirt is a quick fix, not a new shoe.
Compare
Other shoes in the line
Proudly made in America
Designed, printed and assembled in our own American shop, with a high-quality American-made brush on every shoe.